Manufacturing Process Flow
B.S. Shakti steel Pvt. Ltd. is committed to production of Superior Quality Stainless Steel Wires in different grades and sizes. Superior Quality is the bench mark of the Production Process being followed at MSL.
Pre Manufacturing Inspection
The wire rod is physically inspected for size, seams, cracks & other physical properties like Tensile Strength. The chemical properties of the wire rod received are also analyzed in house for grade verification.
Pickling & Coating
After the wire Rod is cleared from the Pre manufacturing Inspection, Pickling & coating is done followed by baking to remove moisture content from the wire rod, to be fit for wire drawing.
Wire Drawing
The Pickled & Coated wire Rod is then drawn to various sizes as per customer order in Continuous Dry Drawing Blocks. A strict quality inspection is carried out for diameter, tolerances at every stage to ensure production of a dimensionally correct product.
Annealing
The drawn wire is annealed in Strand Annealing Furnaces of various capacities depending on the diameter of the wire. A strict quality check for UTS is carried out to ensure the quality of the product is maintained.
Wet Drawing
The Annealed wire is further drawn to fine and superfine sizes in oil medium in wet drawing machines. A strict quality inspection is carried out for diameter, tolerances at every stage to ensure production of dimensionally correct product.
Final Inspection
The final inspection or pre dispatch inspection of the finished product is carried out for Surface, Diameter, Tolerance, Ultimate Tensile Strength, Elongation and Chemical properties.
Packaging & Dispatch
After the material is cleared for dispatch from the final inspection, the material is packed as per standard packaging norms or as per customers' specific requirements in coil, hangers, bobbins etc.
